Parts & Accessories
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
Allows use of two Blendr mounts on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Does not include mounting hardware
CR2450 battery for use in SIGMA computers. Compatible models: - BC 1909 - BC 2209 - BC 2209 Targa - ROX 8.0/8.1 - ROX 9.0/9.1 - ROX 5 - ROX 6 - BC 23.16 STS
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter
Powertap's low-profile speed or cadence sensor harnesses the advances in accelerometer technology to leave the magnet in the dust along with your competition. - Can be programmed for speed or cadence. - Easily attaches to crank arm or hub. - Dual-band Bluetooth Smart and ANT+ compatibility. - Low-profile design with no magnet required.
$64.99 - $69.99
Out-front computer mount for Garmin Edge, Forerunner, and Touring cycling computers. This is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Supported Computers – Most Garmin Edge, Forerunner, and Touring models, including the new Garmin Edge 520, Edge 20 and Edge 25 models (Edge 1000 fits on the longer XL mount) - Combo Compatible – versions available that support GoPro style interface action cameras and lights - Weight – (31.8 mm) 55.4 grams - Weight – (35.0 mm) 60.4 grams Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *K-EDGE Combo Mount are NOT DESIGNED to hold a Cycliq Fly 12. (Cycliq Fly 12 & Fly12CE users should choose the K-EDGE K13-410, K13-420, K13-2450 GO BIG camera/light mounts.) Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.
Use Garmin's elastic bands with your quarter-turn bike mount to attach your compatible Edge to your bicycle's stem or handlebars.
Stay ahead of the pack with Garmin's Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).
- For use with trainers and spin bikes only - Holds iPad Mini, Kindle Fire, Nexus 7, Samsung Galaxy 7 - Includes touch screen friendly splash-proof bag - Universal clamp attaches to all round bars up to 1.5" diameter - Viewing perspective can be set for preference - landscape or portrait - Instant removal and installation of device - Neat rubber bumpers grip and help cushion device - Mini-Tablet Holder max dimensions: - Holds devices with max dims 8.6" x 5.5" x .625" | 220 x 140 x 15mm (H x W x D)
Mounts a tablet to the handlebars of a bike in a trainer or a spin bike. - For indoor use only (spin bikes/trainers/rollers) - Universal clamp attaches to all round bars up to 1.5" diameter - Viewing perspective can be set for preference, landscape or portrait - Includes touch screen friendly splash-proof bag - Instant removal and installation of device - Hold tablets 9-10"
Connect your desktop to CycleOps VirtualTraining.
Cadence Magnet for all CatEye computers that record cadence.
Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors
Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
Easily integrated Designed specifically for specific Bontrager Rally MIPS mountain bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount light and camera accessories on top of your Bontrager Rally MIPS mountain bike helmet - Tested with accelerometer for intended breakaway point if involved in a crash
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence magnet improves signal for wider gaps between crank and sensor
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs. • ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery • Works with Trek DuoTrap compatible bikes
Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm. • ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Independently adjustable arm for precise alignment of speed and cadence sensors • Includes Bontrager wheel magnet and crank cadence band • Includes silicone mounting strap to fit most chainstays and CR2032 battery • Visit www.thisisant.com/directory/ for compatible ANT+ devices • Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices
Easily mount your computer in the fastest, most aero position possible with the Bontrager Speed Concept Mount. • Computer mount for the 2014 Speed Concept • Mounts to all mono extensions creating a faux bar for any standard handlebar-mount cycling computer
$17.98 $34.99 49% Off
Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
With aerobars, short stems and hydration systems crowding the front end of your bike, it's hard to mount a computer. But, with Xlab's Aero Computer Mount Gen 2 you can mount your computer to your stem cap! It's aero because it fits neatly behind aero drink systems and horizontally mounted bottles, and the extra height of the mount makes your computer easier to read. It can also be mounted on the Xlab Torpedo Mini Mount, placing your computer in front in your line of sight. • The Aero Computer Mount, re-designed! Aerodynamically designed and longer to support larger screen computers • Mount in front of Torpedo Systems or on stem bolt • Helps reduce drag from a computer mount with one that was designed with aerodynamics in mind • Mount in front of TORPEDO SYSTEM (sold separately) for optimum viewing. • Mount on stem when using non-XLAB drink systems (sold separately) • Easy to read when in aero position • Fits most computers including the new longer form factor models (sold separately) • Mount is 37 mm wide. Plenty of room to support the popular Garmin computers (sold separately) • Includes hardware and instructions • Weight: 29.5 grams
• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)
Page 1 of 6 Next page