Filter By:
Parts & Accessories
$52.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
$9.99
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head.
• Presta valve
• 90 degree inflator works with most pump heads
$16.95
Smaller Head fits every known Disc wheel made. Includes Prestacycle's newest version of the Mini Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
$17.99
Bike tire gauge.
Take the guess work out of finding the right tire pressure. The Dial Gauge's simple and rugged design will read tire pressures up to 140 psi.
$5.49
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
$150.00
Converts Presta valves for use with Schrader-compatible inflation devices.
- Machined aluminum is lighter than brass alternatives
- Rubber O-ring provides a secure seal to prevent air leakage
- Jar of 150
$0.99
A lightweight aluminum adapter allows the use of a Schrader pump on Presta tubes.
$9.99
Lightweight plugs for tubeless tire punctures.
When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
$24.99 - $30.99
Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.
$7.90
- Solution for mounting pumps and C02 inflators on frames or seatpost
- Soft rubber block and Velcro loops hold pumps tightly
$22.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
$29.95
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
$11.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
$14.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
$89.95
Easy-to-read digital gauge can be attached to a pump or used alone and provides accurate pressure readings up to 300psi / 20.7bar. Rotating head works with Presta, Schrader or Dunlop valves on bike / motorcycle / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. The air release button allows fine tuning pressure.
Specs
- PUMP HEAD COMPATIBILITY: Presta / Schrader pumps
- TIRE VALVE COMPATIBILITY: Presta / Schrader / Dunlop valves
- GAUGE: Digital, 300 psi / 20.7 bar
- UNIT: psi, bar, kg / cm2
- BATTERY: CR2032 x 1 (included)
- THUMB LOCK: Aluminum
- PRESSURE TUNING: Air release button
- BODY: Aluminum / Engineering grade polymer
- SIZE: 9.2 x 5.8 x 4.3 cm / 3.6” x 2.3” x 1.7”
- WEIGHT: 102 g / 3.60 oz
Added Features:
- Rotatable head / gauge
- Auto-off function
$37.95
Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.
$4.95
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.
$45.00
Adapts Presta valve stems for use with standard Schrader pumps.
$100.94
With the TIRE BOOSTER, tubeless tire assembly can be accomplished easily. Even without a compressor. With a power of up to eleven bar every tire immediately seats itself safely on the rim and K275:L277seals everything evenly. If you need an even bigger flow of air, a special adapter is also available. The 435 g light, handy cylinder is the perfect remedy for every tubeless tire assembly, whether at home or on your trips.
Only for SV valves.
- With the pressure of up to eleven bar every tire immediately seats itself safely on the rim and seals evenly
- Great for use when setting up tubeless tires
- Refill using a floor pump
- Compatible only with Presta valves
$39.99
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
$11.99
Head will retrofit all SKS pumps.
- One hole for Presta/Dunlop, one for Schrader
$12.95
Prestacycle's new Mini Angle Presta Head has more room to fit into more wheels. It includes their newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
$39.95 - $49.95
Coil hose made is USA is superior to imported coil hoses. Rated for high pressure and durability. Brass swivel ends on both ends of the hose. Standard 1/4” NPT threads.
Narrow hose increases strength and reduces waste when using Nitrogen. Short length hose recommended when your inflation source is close to your work or is portable and is usually moved to your work. Great for Nitrogen and small portable Air Compressors. Vibraseal coated threads, no thread tape or sealant needed!
$16.95
It’s back, the Pro’s favorite! Perfect for Tubeless tires, valve extenders and any Presta valve. It includes Prestacycle's newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for any Presta application.
Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. Deep head adapts to a wide variety of applications including valve extenders. The head is now very easy to get on and off.
This head is a MUST for Tubeless tire users. Allows high-flow inflation with the valve core removed for seating tires. PUSH on / PUSH off – the fastest way to get you going.
Made with nickel-plated 6061-T6 alloy – Strong as Brass and only 1/3 the weight. It’s also compatible with Silca pumps and can be adapted to other pump brands with our optional Schrader barb or our floor pump replacement hose. Patent-pending 2-way connector screws onto the Prestaflator threaded connector or directly clamps to a hose.
$5.95
Prestadapter is a lightweight Presta-to-Schrader adapter with one more great feature. The hole on the opposite side is a Presta valve core remover! Super-light Anodized Aluminum.
- Schrader to Presta valve adapter
- Presta valve core tool
- Forged alloy single piece precision machined body
- Only 1.3 grams actual weight each
- Two (2) adapters included
$69.00
The new Prestaflator Digital is made possible by Prestacycle's new Rapid Response Digital Gauge. During inflation, the gauge is capable of showing immediate changes in pressure, enabling fast inflation – now with supreme accuracy. The gauge uses highly accurate, non-wearing circuitry for pressure readings, so it does not wear-out or loose accuracy like traditional Dial gauges. Highly accurate readings are across the whole range, making this tool excellent for Fat Tire, Cyclocross, MTB as well as Road Bikes. Easy Tool-less replacement of the two CR2032 batteries (included).
Page 1 of 2
Next page