Cranksets

The SRAM RED AXS Crank Arm Assembly features hollow carbon Exogram crank arms for a lightweight, strong, and elegant crank. It can be paired with any SRAM AXS spider or integrated chainring, with or without power. - The 8-bolt interface is compatible with power and non-power AXS spiders and integrated chainrings - Not compatible with SRAM's 3-bolt direct mount interface - Hollow Exogram carbon arms - Spider and chainrings sold separately - DUB spindle interface - Compatible with all SRAM Road DUB bottom brackets - Number of Chainrings: No Rings, No Spider Included - Crank Intended Use: Road, Tri, Cyclocross - Pedal Spindle: 9/16" - Spindle Interface Type: SRAM DUB - Chainring BCD: Direct Mount SRAM - BB Included: No

The STYLO 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. 6000-series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - 6003 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

RaceFace Ride crank arms are forged from 6066 aluminum with aggressive styling for a high strength to weight ratio. - Bottom bracket sold separately

Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS

The STYLO 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. 6000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - 6003 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs

True competitors are always looking for a performance advantage — a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility, and durability. Specifications: - CRANK ARM LENGTH: 165mm, 170mm, 175mm - BB SPINDLE INTERFACE: DUB - BB COMPATIBILITY: All SRAM MTB WIDE DUB BBs, DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - SPEEDS: 12 - CHAINRING MATERIAL: No rings - BOLT CIRCLE DIAMETER (BCD): Direct Mount (DM) - CHAINLINE: 55.0mm, n/a - CHAINRING SIZE: No rings

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant,integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - BB not included

The Shimano FC-M371 crankset for square bottom brackets features a rigid 2-piece construction and Hyperdrive SG-X chainrings. - Chain guard included - 9-speed

The SRAM SX Eagle Crankset includes Eagle platform styling and features at an entry-level price point. SX Eagle cranks are compatible with all levels with SRAM Eagle drivetrain systems. - Offers the same chain retention performance as seen in all higher-level Eagle drivetrain cranks - 32T direct mount X-SYNC 2 steel chainring included - Aluminum crank arms - 11/12-speed compatible - Bottom bracket sold separately

Forget front derailleurs; SRAM's Rival 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. It combines the durability, simplicity, and efficiency SRAM is know for on the road with their 1x mountain technology, X-Sync. - Single-ring drivetrain simplifies functionality - Forged aluminum with detachable spider: 42T and 52T X-Sync tall, square tooth design provides maximum control - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses for the inner chain links and rollers - Weight: 799g (24mm spindle, 172.5mm, 42T, no BB)

- Forged 7050 AL gives this crank phenomenal strength, earning it an Enduro rating at light weight - E-bike crankset - Impressive strength to weight ratio - Black satin finish - CINCH direct mount for easy 1x Can be 2x with removeable spider (sold separately)

- 2-PIECE CRANKSET for 142 mm or 148 mm O.L.D. frames - DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention - Q-factor 172 mm - Direct mount chainring - Chain Line 52 mm - 1x12-speed

The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included

Shimano Tourney FC-A073 crankset - 7/8-Speed compatible - SG-X Steel chainrings - Square taper JIS - Fixing bolts not included - Chainguard model

Kick your mountain biking into gear with the performance and durability of an Alivio MT210 crankset. - High-quality anodized finish - Precise and reliable shifting

The Omega crankset is where fashion meets function, combining sleek styling with robust industrial design elements. Updated 11-speed compatibility puts the latest shifting technology into an attractive, price-conscious crankset. - Die-cast aluminum crank arms are lightweight and durable - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Number of Chainrings: Double - Pedal Spindle: 9/16" - Chainline/Hub Compatibility: 130 Hubs - Rings: 50/34 - Spindle Interface Type: FSA MegaExo 19 - Chainring BCD: 120, 90 - Bottom Bracket Included: No

SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems

The Campagnolo EKAR Crankset is a lightweight and efficient 1x13-speed crank designed for gravel riding and racing. - The 2-piece crank features a strong and durable 630-grade steel alloy crank axle mated to a lightweight carbon fiber spider and unidirectional carbon fiber arm - Must be used with a Campagnolo Pro-Tech bottom bracket - Chainring features a narrow-wide tooth design for efficient drive and maximum chain security - Easy access to external crank bearings - Easily interchangeable alloy rings – no need to disassemble the crankset - Narrow Q-factor – 145.5mm Specifications: - Number of Chainrings: Single - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 123 - Pedal Spindle: 9/16" - Drivetrain Speeds: 13

- BCD: Direct Mount Shimano - Chainline: 55mm - Crank Arm Length: 170mm - Material: Aluminum - Interface: Hollowtech II - Speed: 11/12 - Crank Spindle Diameter: 24mm - Drivetrain Spacing: SuperBoost+ - Pedals Thread: 9/16''

- Cinch Direct Mount Technology for 1x - Direct power transfer from stiff carbon fibre construction - Built for Road, CX, Gravel, Tri, TT - Chainline: 1x = 47mm, 2x = 45mm - Weight: 442g (40t, 1x), 590g (2x) - Q-Factor: 149mm - Bottom bracket/spider sold seperately - For 2x configurations, removeable spider required.

Take control of your crankset with complete modularity from ROTOR's new ALDHU cranks. These streamlined cranks combine an innovative modular structure with top-tier 7075-aeronautic grade aluminum, allowing you to adjust your axles and chainrings to individually customize your ride based on your needs, and your bike's standards. It begins with the 3D+ CNC machining to ensure unmatched rigidity from spindle to chainrings so you can take control on the roughest roads. The ALDHU is available with two different 30-millimeter spindle options that offer stiff power, and room for rim brakes or disc brakes. A wealth of crank-arm lengths allows you to optimize your power, while OCP Mount technology lets you further fine-tune your ride with Q rings. The ALDHU’s proprietary, patent-pending design is based on the modularity of each crankset component. The ALDHU's name comes directly from our racing heritage. It is an abbreviation of Alpe d’Huez to commemorate ROTOR’s first iconic victory at the Tour de France with Carlos Sastre. - Modular 7055 aluminum arms with exceptional stiffness-to-weight ratio - OCP direct mount rings allow the rider to configure to their optimum chainring position for maximum power transfer - Axle spindle, spacer, DM rings (1x/2x) and bottom bracket options available separately - Optional 4x110BCD spider available, use RR-2520

The R-Hawk checks all the standard boxes for an all-mountain/enduro crank. Like ROTOR’s REX cranks, the R-Hawk is a work of engineering built on the principles of lightweight and rigid, but R-Hawk’s modular concept offers compatibility that meets – and even exceeds – current trends in mountain bike technology. Crank arms will be available independent of an axle and chainrings; there’s no longer a factory-assembled arm+axle, and both crank arms can be removed from the axle. This way the R-Hawk can be mounted to standard, boost, and downhill axles. - Lightweight, modular 6082 aluminum arms with exceptional stiffness-to-weight ratio, with the ability to handle the demands of enduro and DH - OCP direct mount rings allow the rider to configure to their optimum chainring position for maximum power transfer - Axle spindle, spacer, DM ring, and bottom bracket options are available separately - Due to the inset bore location of the pedal threading, some flat pedals with a large inboard bearing may not be compatible with the crankset or crank boots

Unleash your Power with LG1 Carbon Cranks World Cup proven for years, the Q Factor, overall profile, and volume of our Gen4 cranks have been greatly reduced, while strength and fatigue life has been dramatically improved. What wizardry is this? The engineers won't say, but the graphs and race results don't lie! The spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance. The adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor. What's in the box: Cranks w/Self-Extractor, Installation Tools, Lockring, APS Adjuster, and Crank Boots - The lightest, purpose-built carbon Enduro and Downhill crankset - Built upon race-proven World Cup DH testing and results. Ultra-compacted carbon fiber arms are meticulously bonded to e*thirteen's Connect™ Polygon interface, which creates a robust, reliable, impact-resistant spindle-arm junction - Adjustable chainline accommodates multiple rear-axle spacing configurations, meaning you can achieve either configuration by simply placing the spacers inboard or outboard of the chainring - Carbon fiber downhill crank arms and aluminum spindle w/ Quick Connect™ lockring and Adaptive Preload Adjuster (APS), compatible with Quick Connect™ dual width Guidering M - Includes crank arm protectors, crank arm, and chainring/BB removal tools - 536g (34t M ring)

Continued development of our popular crankset has led to the EVO Edition, a benchmark for aluminum MTB cranks. The latest FEA analysis tools, rigorous lab testing, and extensive field testing mean the EVO crankset is both lighter and stiffer than the previous model. Now featuring a self-extracting axle/arm interface, simplifying fitting and removal. And all proudly designed, tested, and manufactured in Barnoldswick, UK. - 15% lighter and stiffer than the previous model - Now featuring a self-extracting axle-to-arm interface, simplifying fitting and removal - Forged and CNC machined 7075 series aluminum alloy crank arms - Unique expanding spline/arm interface - Versatile Spline mount for chainring/spider - 30mm oversized axle - Weight: 641g (arms, axle, and 34 tooth spiderless ring)

The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.

The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.

The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum

- Manufactured from UD Carbon with matte clearcoat - Handmade in Canada - SixC G2 Pedal Insert for increased Rally Factor - Burlier 7050 Spindle - Cinch technology for game-changing compatibility

Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - Cinch technology for game-changing compatibility - Includes 30mm spindle, for 68/73mm BB shells

The SRAM RED crankset leverages a pivotal design innovation: smaller chainrings and a wider cassette range. This leads to smoother and faster shifting up front and more useful gearing for today's riders. The new configurations improve cadence and efficiency while also delivering shifts that are crisp, clean and quick-every time. Features - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Improved front shifting performance for crisp and accurate front shifts - Unique chainring design results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability, simplicity and broad compatibility - Power upgradeable Specifications - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs, GXP/PF GXP 68mm - Chainring Size: 46/33, 48/35, 50/37 - Crank arm length: 165mm, 167.5mm, 170mm, 172.5mm, 175mm - Chainline: 45.0mm - BB Spindle Interface: 24mm, DUB - Chainring material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank arm material: Carbon

The SRAM SX Eagle Crankset includes Eagle platform styling and features at an entry-level price point. SX Eagle cranks are compatible with all levels with SRAM Eagle drivetrain systems. - Offers the same chain retention performance as seen in all higher-level Eagle drivetrain cranks - 32T direct mount X-SYNC 2 steel chainring included - Aluminum crank arms - 11/12-speed compatible - Bottom bracket sold separately

The X01 DH crankset with X-SYNC technology is engineered for ultimate DH performance in the most aggressive terrain. The carbon crank combines stiffness and strength with lightest-in-class weight of under 800 grams. Proven in World Cup and World Championship racing, it's the crankset made for relentless downhill rides. - Carbon DH racing crank - CNC-machined, 7075, two-tone anodized X-SYNC chainring, 94 BCD - X-SYNC technology compatible with SRAM 1x7 and 1x10-speed DH drivetrains - X-SYNC tall, square tooth design provides maximum chain control - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses for the inner chain links and rollers - Lightest in class carbon construction - High strength alloy pedal lug

The SRAM GX Eagle DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 7000-series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer, and stronger crankset - Optimized 7000-series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - 56.5mm chainline

Some riders test their limits more than others. For these riders, the GX Eagle DUB crankset allows them to go all in, every day they ride. The best aluminum crankset we make, engineered to deliver consistent performance every ride. Featuring our X-SYNC 2 tooth profile chainring for complete chain control, each tooth's thickness is toleranced and controlled to work seamlessly with the chain's inner and outer links. DUB technology's patented spindle design and bottom bracket provide a uniform approach to fitment, better sealing, and forward and backward compatibility. Simply put, the forged aluminum GX Eagle DUB crankset is the no-frills choice of riders who know. - Our best aluminum crankset - Direct mount interface compatible with chainrings across the entire Eagle Ecosystem - Master GX colorway as part of Eagle Colorsystem—pairs with all cassettes and chains, from Black to Gold to Rainbow to HardChrome and all-new Copper

Fits 19mm team & talon cranks: - Splines: 48 - Diameter 19mm - Length: 5.5" (140mm) - Spindle bolts: 3/8" X24tpi (not included) - Also fits: Cult OS, Demolition Revolt, Rant 48-S, WTP Royal, Redline Device and other 19mm 48 spline cranks

- Solid forged crank arm - Square interface - Aluminum - Speed: 10/11 - Chainline: 44mm

The SRAM carbon GX Eagle crankset delivers consistent performance every time out. Featuring SRAM's X-SYNC 2 tooth profile chainring, the Carbon GX crankset is engineered for complete chain control. Each tooth's thickness is precisely toleranced and controlled to work seamlessly with the chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination, and forward and backward compatibility. Now everyone can benefit from a new measure of durability.

The EC90 SL crank utilizes the Race Face CINCH technology, which allows for direct mount 1x rings as well as direct mount 2x spiders, and industry-leading versatility. Increasingly popular 1x setups have many advantages including weight and simplicity. Their major limitation is adaptability. A Cyclocross rider's ability to ride a course, then effortlessly change chainrings to their preferred setup is a major necessity that has, until now, been overlooked. Easton refines the design for larger ring applications with improved chain retention while reducing running noise and friction. Arms come assembled with spindle. Rings and BB sold separately. - EC90 SL carbon arms feature hollow carbon construction, while the spindle and pedal inserts features high-grade aluminum - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation - Chainline: 1x 47mm / 2x 45mm - Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - 30mm spindle - BB Options: BB86, BSA 68mm, PF30 68mm, BB30 68mm, BBright, 386Evo - Bottom bracket and chainrings sold separately

The Vision Track Crank features oversized solid forged aero arms optimized for rigidity and a deep-tooth 49T chainring, as well as an ultra-stiff 30mm spindle. The 386EVO spindle design assures compatibility with all major bottom bracket shells. - Solid forged alloy 6061 - Forged 7050 30mm spindle - Polished anodized black with laser graphics - Number of Chainrings: Single - Chainline/Hub Compatibility: 120 Hubs - Crank Intended Use: Track - Pedal Spindle: 9/16" - Rings: 49 - Spindle Interface Type: 386 EVO - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chainring BCD: 144 - BB Included: No

- Super compact Adventure design allows for smaller more ideal ring sizing - Modular crankset: choose your chainring sizes - Cold forged 6061-T6 aluminum arms for extra strength with 24mm steel spindle - Shimano 10/11 speed compatible -*Chainring sold separately. 110BCD outer and 74BCD inner - A 68/73mm external bottom bracket with sealed cartridge bearings is included

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 5

The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Shimano Dura-Ace 9000 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings

Not ready for carbon? The Gossamer Pro Modular AGX+ is a high-end crankset for alloy lovers. The cold-forged aluminum arms are heavily scalloped for the maximum strength-to-weight ratio. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Cold-forged alloy spider - CNC-machined alloy spindle - Chromoly chainring bolts - Q-Factor - 154mm - Chainline - 47mm - BCD - DM/90mm - Chainrings - 46/30T - 656 grams (46/30T x 170mm)

With multiple World Championship medals, EWS series wins and Olympic gold medals to its name, our XX Eagle cranks set the standard. The XX Eagle T-Type Wide crankset is the evolution of that standard. Carbon fiber engineered with a foam core to give both incredible strength and maximized stiffness. The XX Eagle Transmission crank also features a first-of-its-kind removable and replaceable bash guard system that riders will appreciate. - Carbon crank arms with foam core are extremely lightweight and provide maximum stiffness - Includes XX T-Type removable and replaceable 2-Guard aluminum bashguard to protect your chainring when riding rough terrain - 55mm Chainline - 174mm Q-factor - DUB bottom bracket and spacers NOT included

- Forged aluminum arms with JIS square spindle taper (129mm BB sold separately) - Super Fluid Drive riveted steel rings - 50mm chainline - 1107g

Rise and Grind with our lightest cranks ever! We applied decades of World Cup racing experience to develop our patented design for the lightest production carbon crankset we've ever made! Lightweight, 30mm spindle, APS preload adjuster, and self-extractor bring the class-leading combo to your door. - Lightest production crank on the market - Gen4 cranks have the spindle on the non-drive side of the crank for easier chain guide setup and drivetrain maintenance - Use a Boost chainring to fit non-Boost chainlines on this 68mm BB crank - Now includes an 8mm self-extractor, meaning the cranks can be removed with nothing more than an 8mm allen key - Carbon fiber crank arms and aluminum spindle w/ Quick Connect lockring and Adaptive Preload Adjuster (APS), compatible with all - Quick Connect guide rings - 385g (73mm w/32T UL chainring), 398g (68mm w/38T UL chainring)

The RX Crankset is our latest step into the Gravel and Road world, following our successful RX4 calipers and RS4 hubs. A two-piece hollow design allows for the removal of any unwanted material increasing stiffness and reducing weight. All are proudly designed, manufactured, and tested in Barnoldswick, UK to the same standards as our MTB cranks, for confident use on or off-road. - A two-piece hollow design allows for the removal of any unwanted material increasing stiffness and reducing weight - Tested to the same standards as our MTB cranks for confidence on or off-road - Featuring a self-extracting axle-to-arm interface, simplifying fitting and removal - Fully CNC machined 7050 Aluminum for precise material removal - Unique expanding spline/arm interface - Versatile Spline mount for chainring/spider - 30mm oversized axle - Weight: 518g (172.5mm and 5 bolt spider, w/o BB)

Take flight with the eeWings from Cane Creek. These titanium cranks are designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness and weight. - eeWings Mountain 165mm, 170mm or 175mm - 30mm Spindle - 10 year Warranty

SRAM's S600 3.0 Crankset features forged arms for increased strength and reliability paired with smooth shifting chainrings for the best combination of looks, performance and price.

SRAM's Force 22 Crankset uses unidirectional carbon arms with a forged aluminum spider and integrated bottom-bracket axle to ensure top-notch stiffness for awesome power transfer and exceptionally low weights. Experience phenomenal front shifting with SRAM's X Glide R chainrings that start out as 5mm-thick aluminum plates and then precision machined to eliminate all unessential material while retaining extreme stiffness. With so much great technology and 11-speed compatibility, they're a force to be reckoned with.

- Lower slider replacement parts for E-13 chainguides

- Chrome plated CrMo steel chainring bolt/nut sets (Track is NJS approved)

Shimano's Tiagra Front Chainwheel is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Series: Tiagra 4700 - Crank Construction: 2-piece crank construction - Cassette Compatibility: 10-speed - Chain Compatibility: Series color - Bottom Bracket: BB-RS500 / BB-RS500-PB

The Saker Cranks are designed to be an affordable 3-pc crank with tubular chromoly arms that have a single pinch bolt design. It uses a 19mm chromoly spindle with 8 splines. The cranks include a 19mm Mid BB with spacers. RHD/LHD compatible - Tubular chromoly 3-piece - RHD/LHD compatible - Includes mid-sized bottom bracket

Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.

Shimano XT Left Crank Arm - Spindle Interface Type: Hollowtech II

With their New Rando crankset, Velo Orange meets the demand for the classic 50.4 BCD crank still sought after in randonneuring and touring circles around the world. New Rando is modeled after classic 50.4 BCD cranks but with modern touches to improve performance. These include ramped and pinned chainrings that are thicker for less flex, stainless steel hardware, and forged 7075 aluminum arms. Get the classic style and versatility you want with the modern performance you've come to expect. - Spindle interface: Square Taper JIS - Weight: 540g

Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. The smooth shifting rhythm allows you to maintain speed and acceleration over challenging terrain. Hollowtech II technology provides the best balance of stiffness, strength, weight, and rotating performance. Features: - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Optimized gear combinations and ratios for trail riding - Close step tooth profile for smooth shifting - Stable shifting performance in any suspension position - Single spike structure for stable shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 51,8

Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. Its smooth shifting rhythm maintains speed and acceleration over challenging terrain and provides optimized gear combinations and ratios for trail riding. Features: - HOLLOWTECH II Crankset (3x10-speed) - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Close step tooth profile for smooth shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 50