Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Seatposts

$114.95 - $121.95
Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
$209.99
Ultra-light comfort and control The all-new RSL 27.2 Seatpost is an ultra-lightest carbon seat post, that now comes with an all-new design with a CnD shape profile for a more controlled and forgiving ride experience. An ultra-light carbon seatpost with unique shape profile for increased compliance. - CnD shape profile increases torsional stiffness and vertical compliance - Designed to offer increased compliance at maximum and minimum insertion points - 2-bolt design offers independent setback and tilt adjustments (+/- 12 degrees) - 100% OCLV Carbon fiber shaft and head - Includes 7x7mm round rail clamp compatibility - Carbon 7x10mm saddle ears sold separately
$36.99
Dimension Suspension Seatpost - Clamp Style: Std Rails - Diameter: 27.2mm - Length: 350mm - Material: Aluminum - Max Height: 255mm - Min Height: 130mm - Offset (mm): 0mm - Seatpost Type: Suspension - Travel (mm): 35mm - Weight: 450g
$286.00
Salsa's Regulator Ti Seatpost delivers the maximum comfort and performance of titanium, along with the convenience of independent adjustment of saddle angle and fore/aft positioning. This post is built for the long haul with specifically designed, stainless steel bolts, as well as CNC'd aluminum head internals and saddle clamps to provide the ultimate in strength and durability. - 3/2.5 titanium with a brushed finish - Length: 410mm - Proprietary head design allows independent saddle angle and fore/aft positioning - Small, lightweight head design uses CNC-machined AL-6061 internals with stainless steel threaded stud to prevent thread stripping - CNC-machined AL-7075 saddle clamps - Specially designed, stainless steel bolts provide ultimate strength and durability *NOTE: Not for use with carbon seat rails or ovalized seat rails
$199.99
The latest generation Thudbuster ST is superior to its predecessor in every way. Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, and additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. - Travel: 50mm - Weight: 580g - Max Rider Weight: 330lbs
$99.95
Sleek design and ultimate functionality of the WCS 1-Bolt seatpost are the hallmarks of Ritchey design. Single bolt-actuated side load clamp offers easy adjustability and simple security in a post that works as nicely as it looks. - 3D Forged 7050 Alloy - Available in 27.2, 30.9 and 31.6mm diameters - Available in 350 and 400mm lengths - 20mm Offset - 7x7mm saddle rail clamp included - Interchangeable clamps available for carbon rail saddles - Saddle Clamp Torque Spec: 12Nm - Finish: Blatte - 195g (27.2/350)
$429.00
The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down. - Shorter overall post length - Stealth Internal cable routing
$69.95
The proven 2-bolt design on this classic provides a class-leading balance between strength, weight, and adjustability. The two-bolt design is easy to adjust and holds tight. Its low profile clamp reduces stress on lightweight rails and won't bottom out, and the bolts are oriented to the axis of the rails for the greatest contact area with the saddle. The Classic also features Ritchey's 'Classic' high-polish silver finish. - Material: 2014 alloy - Total length: 350mm (including 100mm of minimum insert) - Saddle clamp: standard - Saddle clamp torque: 13Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 260g (27.2x350mm) - Color: high-polish silver
$104.95
Carbon seatpost with a proven low-profile, 2-bolt clamp that won't bottom out on the saddle. - Low-profile clamp reduces stress on lightweight rails - 2-bolt design securely holds the saddle in place and is easy to adjust - Offset: 25mm - Clamp Style: Standard Rails - Material: Carbon
$269.99
- Internal Routed, Infinitely Adjustable Design - Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head - With 7075-T6 Forged Clamp - Featherlight Thumb Actuation - Industry Leading - Intelligent Keyway System - Ensures Minimal Play - Easiest Installation - Cable Head Attaches At Base - Cold Weather Approved - Tested Down To -20C. - 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware - Remote Position: On handlebar - Cable Routing: Internal - Offset: 0mm - Clamp Type: Standard, double bolt - Seat Post Material: Aluminum - Seat Post Weight: 510g
$104.95
Comp Carbon Zero Setpost
$62.99
The Elite seatpost is a distilled design guaranteed to deliver reliable everyday performance for years to come. Perfect as a replacement or your next upgrade. With an alloy body and a 2-bolt micro adjust head, this seatpost is available in a slew of diameters, lengths, and offsets to get you the right position. Key features: - 2-bolt micro-adjust head mechanism offers 15 degrees of adjustment - Constructed of 2014 alloy - Forged 6061-T6 alloy head, top and bottom clamps - Unique clamp shape allows for easy saddle changes - Compatible with standard and oversize carbon saddle rails - Suitable for road or mountain use
$240.99
A streamlined design with fewer moving parts and better seals makes for a dropper post that performs consistently and requires less maintenance. The updated Bontrager Line Dropper Post is easy to set up and now even easier to service. The cable-actuated hydraulic locking design provides proven functionality for bikes with internal routing. - Remote cable actuation with ergonomically designed under-bar lever - Air-sprung hydraulic locking cartridge offers infinite adjustability within dropping range - Keyed chassis prevents rotation for a stable ride - 2-bolt rocker head with micro adjustment allows for easy saddle tilt adjustment - Internal cable routing keeps housing tucked away and free from moving wheel - Includes cable, housing, and 1x under-bar remote lever - On-Bar Drop Line Universal Lever sold separately - Frame must be compatible with internally routed seatpost routing
$298.99 - $299.00
New Guts, New Glory Don’t let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. This is the brand-new Reverb, engineered for the next-generation mountain biker. - Completely redesigned internals with new SKF internal floating piston - Improved performance and durability in all conditions - Increased bushing overlap - New dedicated post length per travel length - WEIGHT: 520g (Weight based on 340mm post length, 30.9mm diameter, 100mm travel, MMX remote with shifter hardware and 1300 hose) - LENGTH: 340mm, 390mm - COLORS: Black - MATERIAL: Shaft: 3D forged 7050 alloy , Head: 7050 forged alloy - OTHER: Zero offset , remote: adjustable return speed at the handlebar, discrete or Match Maker X, left or right
$17.99 - $24.99
- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams
$26.99 - $39.99
Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.
$10.99
Genuine replacement parts. Replacement seat posts for a variety of frame styles. Original equipment replacement seat posts. Durable aluminum construction
$73.95
Ritchey's WCS 1-Bolt Seatmast Topper makes saddle installation and adjustment super easy. It's constructed of forged aluminum for strength and the single bolt clamp makes it very simple to find your perfect saddle position. Furthering the ideal fit, the WCS Seatmast Topper comes in 50mm and 70mm lengths and different offsets.
$350.00 - $410.00
3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family. Noteworthy updates of the REVIVE 2.0 include: - One piece 3D-forged upper tube unit for improved stiffness and strength - Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance - CNC-finished actuation lever for even smoother engagement - New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)
$121.95
Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
$299.99
A performance dropper post with an larger 34.9mm diameter and updated design with MaxFlow technology for faster, smoother operation. The Line Elite 34.9 Dropper is easy to set up and easier to drop, with 20% less saddle force required. Avid Matchmaker and Shimano I-Spec II compatibility ensures simple, integrated setup and the included lever provides a great feel with an easy push. Length options from 100mm to 200mm travel ensure there is a size for your ride. Designed for bikes with 34.9mm seatpost compatibility. - Infinitely adjustable air-sprung hydraulic locking cartridge with 20 percent reduction in compression force - MaxFlow design allows for a faster return and less compression force - 34.9mm diameter adds strength and durability while reducing side-play and stiction - Cable-actuated under-bar lever compatible with MatchMaker and Shimano EV - 2-bolt rocker head with micro adjustment allows for easy saddle tilt adjustment - Internal cable routing keeps housing tucked away and free from moving wheel - Includes cable, housing, and 1x under-bar remote lever - On-Bar Universal Lever sold separately
$309.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset
$300.00
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacture/Seatpost Collar - Weight: 178g (25.4mm, 25mm offset), 168g (27.2mm, 0mm offset), 178g (27.2mm, 25mm offset)
$172.00
The carbon Service Course SL seatpost is specifically tuned to be more shock absorbing than the "comfort" seatposts on the market, while still passing our strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt-head accessibility. The Service Course SL seatpost makes it possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types. - Distinctive Zipp cosmetics - Unidirectional Carbon fiber tuned for ride comfort - Lightweight clamping system - Lifetime warranty
$816.00 - $861.00
Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.
$19.99 - $25.99
• Forged aluminum • Integrated micro-adjust seat clamp
$38.99
It’s a traditional straight up pivotal design with a 200mm length.
$59.00 - $62.00
The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings. 0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment. 30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.
$300.00
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)
$69.99
The EA70 Zero is Easton’s top-end aluminum seatpost, with a sleek, low-profile clamp design, impressive stability and great clearance. This post features EA70 TaperWall aluminum tubing coupled with a durable two-bolt integrated head.
$44.99
Easton's EA50 Seatpost is rugged, reliable and perfect for all your cycling adventures. It's made from 2014-aluminum with Easton's TaperWall technology that controls the post's internal thickness, adding material where you need it and none where you don't. It provides excellent strength and durability while keeping the weight low. Plus, the EA50 boasts an easy-to-use 2-bolt clamp for secure seat adjustments.
$39.95
- Extra long forged 6061 aluminum post allowing maximum height adjustment - 2-bolt micro-adjust clamp - 450mm long - 345g @ 27.2mm
$205.00 - $225.00
We designed the Tall & Handsome with strength and elegance in mind, but also to be super easy to setup and adjust. Like all PAUL components, it’s built to the highest standards for tolerance, function, reliability, and ease of use. Machined by us here in sunny Chico, California. - Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA
$39.99
The Tuner pivotal post features a 220mm length with grooves evenly spaced every 15mm for cut lines or seat height indication. - 6061 alloy forged post - Weight: 4.6oz - Clamp Style: Pivotal
$214.99
Such Great Heights The budget-friendly Aeffect R Dropper Post is a rock-solid, shred-ready entry into the dropper post world. Designed right to keep you on the trails and out of the shop as much as possible, you'll wonder how you ever rode without one. It's What's Inside That Counts The brains of this dropper post are an extremely reliable cable-actuated hydraulic cartridge that delivers infinite adjustment within its travel. Simple Saddle Setup A user-friendly zero-offset seatpost clamp really cuts down on the time between setting up your saddle and ripping down the trail.
$320.00
Well, what's to say about our new DIVINE SL? It is simply the lightest production dropper post in the world with a total length of 400mm and 80mm infinite drop. Tailored to the needs of XC and marathon racers, the DIVINE SL is the youngest offspring of our dropper family. Based on the award-winning and patented REVIVE technology, we've modified the internals to work perfectly with the shorter travel. Of course, you can mount and use your DIVINE SL also on bikes outside the XC department. However, the DIVINE SL was specifically designed in respect of XC riders' requirements. One of the features, is the "Tech-Climb" feature. While our DIVINE SL is completely locked in place in the top-out and bottom-out position for consistent riding position, the post can slightly spring in the middle positions. We've found out, that extremely steep and technical (e.g. rooty or rocky) uphill sections can be conquered with much more ease, when the saddle is just slightly dropped (lets say about 1-2cm). Having the saddle dropped just a bit (and not completely), the "Tech-Climb" feature" also adds some suspension to the post, filtering the impacts of roots and rocks. Back fully extended or fully dropped, the post is rigid again. Titanium saddle bolts, carbon and oval rail compatible forged clamping plates, tapered tubes. All of this comes stock on the DIVINE SL to achieve a sensational low weight of 395g (30.9/400mm). Another unique feature of our DIVINE SL: - You can easily cut it to a short as 283mm, if you can spare the extra length with your frame and saddle height. The cut weight can go to a minimum of 345g! - The shorter travel allows the DIVINE SL to come with a design, that doesn't require manual resets like the REVIVE. Of course, our DIVINE SL requires internal routing of the cable through your frame. 1 set DIVINE dropper post includes: - 1x DIVINE SL Seatpost - 1x cable housing 1500mm - 1x Inner wire 1700mm - 2x housing Endcap - 1x remote (optional) - 1x Bike Yoke I-spec adapter or Splits-clamp (optional)
$184.99 - $267.50
The OneUp Dropper post is available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm. We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower. Starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length. The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp. FEATURES - Travel adjust shims allow you to custom tune your post to dial in your perfect length. - Cable actuated for easy installation and a simple no bleed remote - Ergonomic remote paddle position - Reliable sealed cartridge internals - User replaceable cartridge only $60 USD - Easy to service at home - 2 year warranty UPDATES - Shortest total length of any dropper - Shortest stack height of any dropper - New upper DU Bushing in the upper collar - Increased bushing overlap and durability - 100-210mm post lengths in 10mm increments. - 20g lighter SPECS - Drop 120mm, 150mm, 180mm, 210mm adjustable*. - Diameter 30.9, 31.6, 34.9 - Routing Internal only Remote Compatibility: - SRAM Matchmaker X - SRAM MMX clamps - Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 - Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only - 22.2mm Bar Clamp - All other groups 10 speed SHIMANO - Cable clamping remote only (post requires cable stop to be assembled at base of post) - Travel Reducing Shim Reduces travel by up to 20mm. Weight Post Only - (30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g - (31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g - (34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g Remote Only - Remote with 22.2mm Bar Clamp - 46g - Remote with SRAM Matchmaker X / I-spec-EV - 43g - Remote with Shimano I-spec-EV - 43g - Remote with Shimano I-spec II - 41g - Housing and Cable (1300mm installed length) - 50g
$399.99
Built without compromise, the Highline 11 combines premium materials with our tried-and-trusted hydraulic IFP cartridge system, resulting in our lightest dropper post yet. Featuring a carbon quill, carbon head, and titanium hardware, the Highline 11 sheds up to 100 grams over our Highline 7, all without compromising on any features or construction. The post maintains all of your favorite elements such as infinite adjustment and a reliable hydraulic IFP. Built with every rider in mind, from cross country racer to weekend enduro rider the Highline 11 is available in travel lengths ranging from 60mm to 170mm allowing the rider to choose the perfect post for them.
$199.00 - $249.99
The Highline 3 delivers infinite adjustment, smooth feel, and easy installation. Details - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained hydraulic cartridge delivers industry-leading quality and reliability - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt standard head - Remote sold separately
$299.99
The all-new Highline delivers infinite adjustment, smooth feel, and easy installation for any bike. Details - Shorter insertion length to fit more bikes - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained IFP hydraulic cartridge - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt quick-connect head - Remote sold separately
$319.99
Ride longer, ride farther with the eeSilk Carbon premium suspension seatpost. The eeSilk carbon is comparable in weight to traditional rigid performance seatposts while offering 20mm of vertical compliance improving control on rough surfaces and reducing fatigue on long rides. These posts make great enhancements to endurance road bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 20mm - Length: 350mm - Weight: 295g (eeSilk Carbon 27.2) - Max Rider Weight: 250 lbs. - Offset: 8mm
$199.99
The latest generation Thudbuster LT is superior to its predecessor in every way.  Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. - Travel: 90mm - Weight: 750g (31.6mm) - Max Rider Weight: 250lbs
$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel
$359.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Factory Series models feature Genuine Kashima Coat - Remote lever sold separately
$299.95
This 27.2 titanium ti seatpost is an evolution of the groundbreaking Elite seat post designed by founder (LH) Ronnie Thomson. The collection you've come to love and trust, now in Titanium. Ti hardware, precise adjust-ability, and proven performance. Pair with our Elite series stems, a seat post collar, and Ti handlebar for the entire cockpit collection. Features include Ti hardware and our trusty alloy clamp, everything you'd want in a modern Titanium post. A seat post that'll last a lifetime, quality you trust, titanium for the prized bike in your collection. - Infinite tilt adjustment from minus 5° and plus 29° - Super low profile clamps means no interference with the saddle as the swivel nuts are down between the seat rails. - Thomson designs and materials go through extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seat posts meets our seriously aerospace bike geek Thomson standards. - Impact absorbing clamps in the seat post spread and flex on impact to protect the saddle, rails, and rider. The result allows the seat to survive heavy impact loads without bending the rails.
$329.00
- XC - Gravel - Trail focused post - Two-position simplicity - Featherweight - Cable routes in either direction for compatibility with any dropper lever - Zero offset - 352g
$102.80
The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder. - UD carbon shaft with bonded alloy head - Forged alloy "SBS" 2-bolt head - Chromoly hardware - 20mm setback - Fits 7mm standard rails and 7x9mm oval rails - 221 grams
$479.95
Thomson Covert Elite Dropper Seatpost-31.6 150mm Black Internal. We've set the bar with the Thomson covert black dropper post. It's designed around internal routing for clean installation and an updated shift style remote lever for effortless operation. The Thomson Covert Dropper includes a new shifter oriented remote lever for easy operation. The cartridge-based system is designed to have the longest service life in the industry. If repair is needed, it's fast, affordable, and simple. Every part that makes up the Covert dropper is carefully chosen, and of the highest grade quality available. - Custom made Norglide bearing bushings and Trelleborg O-Rings and seals - Thomson saddle clamps and fasteners - Motul Oil for durability and precision quality. - The return speed is damped in the last 15mm of upward travel to be gentle on your seating area. - 60mm (Ø27.2 only), 100mm, 125mm, 150mm of infinite travel. - Passes ISO 4210 fatigue and strength tests for seat posts.
$104.00
The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most. - Carbon shaft - Bonded Aluminum two-bolt head
$50.00
The Salsa Guide Seatpost is designed to blend into the background; just like a good seatpost should. Strong, reliable, and always just where you left it. - 6061 Aluminum shaft - Two-bolt head
$199.00
Why should burly bikes have all the fun? We asked that question when we released our first 27.2 dropper post. The Pine continues the tradition of bringing great, reliable dropper posts to bikes with skinnier tubes, whether it be your classic hardtail, XC bike, gravel grinder or cyclocross rig. All-new versions of the Pine now come with the option of 90 and 110mm of travel. This accommodates more bikes and helps you win the battle against getting bucked forward by your seat on steep and techy terrain. And while extra travel is always a great perk, we think the best addition to the new models is a slick 1-piece alloy stanchion, which drops a whopping 100g of weight from the older models. To keep descending even more distraction free, the Pine features external routing at the midcap rather than the post head, allowing you to keep your cable routing nice and tidy. - Travel: 90mm or 110mm - Post Diameter: 27.2mm - Weights: 90mm - 490g, 110mm - 530g - Infinite Adjust: So you can pick from multiple positions - 1-piece alloy stanchion (no more press-on head) - External cable routing with fixed cable entry at the mid cap - Lever sold separately - 3-year warranty!
$114.99
Pro performance post A seatpost should do one thing well — hold your seat. Our new carbon fiber Pro seatpost does that and more with a reliable 2-bolt design that lets you swap saddles with ease. Great for road or mountain use and available in a slew of diameters, lengths and offsets, this post gives you the setup versatility you've always wanted. - 2-bolt micro-adjust head mechanism offers 15 degrees of adjustment - OCLV carbon fiber shaft - Forged 6061-T6 alloy head with OCLV carbon fiber top and bottom clamps - Unique clamp shape allows for easy saddle changes - Compatible with standard and oversize carbon saddle rails - Suitable for road or mountain use
$390.00
Our award-winning REVIVE is also available as an oversized version for 34.9mm seattubes. Not only the lower tube diameter increased to 34.9, but also the stanchion tube grew form 25mm to 28mm. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strenght and stiffness at the same time. This is unrivaled by the competition. Optimized wall thickness and materials keep the weight extremely low and so our REVIVE MAX weighs in lower than some "regular" sized posts of the competition. Let´s see, what´s special about our REVIVE posts: What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth, … And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first: Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)
$350.00 - $380.00
The Wolf Tooth Resolve Dropper Post is the first dropper post to use a self-bleeding cartridge. It has the shortest stack height of any dropper post on the market, has a short insertion depth, is one of the lightest dropper posts, and is completely serviceable at home. - Self-Bleeding Resolve Cartridge: At the heart of Resolve Dropper Post is a self-bleeding cartridge that removes air from the fluid chamber with every actuation. All dropper posts can get air in the chamber, which leads to sag and squish. Resolve Dropper Post is the only dropper post that purges air from the chamber, which means you'll never need to buy a new cartridge as you do with all other dropper posts. - Shortest Stack Height: The shortest stack height of any dropper post means that Resolve can get your saddle lower than any other dropper post. The lower your saddle, the more room you have to maneuver your bike on drops and techy descents. - Weight and weight per travel is equal to the best: Resolve Dropper Post is one of the most lightweight dropper posts on the market when it comes to grams per millimeter of travel. It's as much as 26% lighter than other dropper posts of the same travel size. - Short Insertion Length: When a dropper post has a short insertion length, longer travel options are unlocked for more bikes. A short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses. - Travel Reduction with Spacers: The travel length of your Resolve dropper post can be customized in order to suit your bike and saddle height. Spacer kits are sold separately or those who would like to have the adjustment made later by their local shop mechanic. If you are comfortable with working on suspension components, you may be able to complete the installation yourself.
$18.99 - $19.99
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.
$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts. - Material: 6061 aluminum - 2-bolt adjustability - Minimum insertion length: 90mm
$199.00
We made this post to honor your most adventurous days on the trail. From the quadzilla climbs to the serpentine descents, the Loam Dropper capitalizes on PNW's best-in-class reliability in our shortest, lightest, and most customizable package yet. The new Loam also features swappable silicone bands that hug the midcap, giving you the opportunity to match your bike (or mood). UPGRADED TRAVEL PLANS By shortening the overall post and adding 25mm of Tool-Less Travel Adjust we’ve guaranteed you more drop across a wider variety of frame designs, sizes, and body types. This means more distraction-free descents with less awkward high fives from your saddle when the trail gets rowdy. UNDER PRESSURE Slow and controlled or swift and poppy? Dial-in your dropper’s return rate with personalized pressure, courtesy of the Loam Post’s adjustable air cartridge. MAKE IT YOURS The Loam Post features a machined channel on the mid-cap that's home to a swappable silicone band. Each post comes with our standard Blackout Black band but we offer our full range of colors to match your bike, PNW cockpit or personal chakra aura.
$159.99
Trek-compatible seat mast cap Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately. Key features: - Ultra-light carbon construction - One bolt head design offers easy fore-aft and infinite angle adjustment - Compatible with all Trek road bikes with round seat masts - 175mm and 135mm lengths - 5mm and 20mm offsets - Aluminum clamp
$69.95
Now available with the iconic high-polish silver finish, the Ritchey Classic Zero seatpost features the same Zero post head and zero setback as the original Zero post. Inspired by life, built to last, and providing a classy aesthetic, the Classic Zero offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're cruising along rough gravel roads, remounting after running a section of slop on the 'cross course, ripping some sublime singletrack, or out on an epic road ride, the Classic Zero seatpost keeps your saddle exactly where you want it. - Material: 6061 alloy - Offset: zero - Saddle clamp: 2-bolt fore/aft - Saddle clamp torque: 7Nm (max) - Seat collar torque: not specified for seatpost—follow frame/seat binder specification - Weight: 290g (27.2 x 400mm)
$169.95
The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.
Page 1 of 2 Next page