Brakes/Levers/Pads

Replacement lever blades for Magura disc brakes

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Formula - RO Racing - T1 Racing - R1 Racing - R1 - C1 - CR3 - T1 - RO - Mega - The One - RX - RR1 - CURA

Shimano Deore hydraulic disc brakes are a solid setup, offering reliable power and rigid brake design for all riding styles, from XC to trail. The BL-MT500 brake levers deliver high-powered Servo Wave performance for rapid initial pad contact, along with I-spec II compatibility. These are paired with powerful 4-piston MT520 calipers that help boost rider confidence and enjoyment. - Highly responsive braking power for greater control and modulation - Sleek and durable master cylinder design - 4-piston calipers provide a wider pad contact area - Heat insulated pads and pistons

- Optimum Heat dissipation - Reliable performance from Cyclecross to Downhill - High durability, even in the toughest conditions - UCI approved for road competition - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Technology: 2-piece design

The forged aluminum Spyke Levers have all the features you would expect from TRP: the ergonomic 2-finger design, Teflon bushings, forged clamp, and return spring. Mated to our Spyke calipers, these levers connect rider and machine for near-telepathic braking feel. - Lightweight design - Ergonomic lever design - Alloy lever and bracket - Teflon bushings - Stainless steel hardware - 2-finger lever blade - For use with RapidFire shifters - Weight: 156g/pair

- High quality, durable stainless steel machined braking surface ensures consistent stopping power and resists corrosion - Reinforced rotor design improves stability and resists warping - Compatible with all sintered, semi-metallic, and organic/resin disc brake pad compounds

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor is design. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

Semi-Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes" - Semi-metallic compound for minimal noise with maximum power - Fits all TRP four piston calipers and Tektro four piston calipers - Color: TRP red - Sold per wheel - Replacment pad for Tektro Q10YS

- Replacement hoods for your Hylex levers. - Color: Black or Gum - Comes in a set of left and right

Fit for modern times. The updated SRAM Force brakeset pairs mechanical rim braking with our wireless Force eTap AXS group. The dual pivot design also accounts for wider road tires without compromising braking power. - Dual pivot design increases braking power and enhances progressive feel - Wider clearance for modern tires and wheelsets (up to 28c) - Updated finish to match SRAM Force eTap AXS - Includes SwissStop pads: Platinum Flash Pro pad (carbon rims) or BHP pad (aluminum rims) - Pad type: Cartridge - Reach: Standard

- Optimum heat dissipation - High durability - Wear indicators - 1.95mm thick - Rounded edge - UCI approved - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Material: Steel

Full sintered metallic replacement pads for flat mount Hylex RS brakes. - Full metallic compound for maximum performance and power - Fits Hylex RS brakes - Color: TRP Copper - Sold per wheel

Replacement lever blades for Magura disc brakes

Cover kits for Magura brake levers.

The Odyssey Evo 2.5 Brake features a wider space to accommodate larger tires. - Forged from aluminum for strength - More clearance for larger tires - Front or rear brake compatible - Includes all necessary hardware

- Entry level to the MAGURA MT world with all of the high-tech features of German engineering skill such as lightweight Carbotecture components and the improved MAGURA disctube for safe stopping on tour and in the city - suitable for mounting left or right

Lock rings for all TRP Centerlock Rotors

Replacement hoods for your RRL levers.

- Optimum heat dissipation - High durabilty - Wear indicators - 1.95mm thick - Rounded edge - UCI approved

9 Series Disc Brake Pads - One piece connected back plate - Performance compound offers excellent bite for strong braking response in a variety of conditions - Pair of disc brake pads for one MT5, MT7 caliper

The eeBrake G4 is the fourth generation eeBrake featuring 100% CNC machined parts and a wider design optimized for 22-28mm rims. It features a stiffer black arch spring, a revised one-piece center adjuster with built-in resistance for easier use, and ghosted laser etching that will stand the test of time. All with the same stopping power and light weight that you've come to rely on from eeBrakes. - The eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation - The cross cable path aligns the brake cable over the center of the brake which provides a clean and aerodynamic line, moving the cables into the "wind shadow" of the frame - Tool-free caliper centering adjustability provides super-precision and pad motion consistency - One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire, allowing for easy wheel removal - Optimized to work with Shimano, Campagnolo, and SRAM levers

- Simple, robust, powerful brake for riders who prefer to work with Mineral oil. - The lever is designed with proven lever technologies and features easy adjustment access and superior ergonomic comfort. - The caliper is based on the Code downhill brake and utilizes the same pads. - Post-mount. - Designed for use with Maxima Mineral Oil only.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

Hope Disc Brake adaptors are CNC-machined and ensure a perfect fit with all Hope Brake sets. - CNC machined in Barnoldswick, England - Includes mounting bolts

SRAM's Rival 22 Front Brake Caliper delivers competition-ready speed control, low weight and lovely streamlined aesthetics that will enhance any road bike. Featuring a powerful dual-pivot design and cold-forged-aluminum construction, the Rival brake offers excellent stopping power. You'll appreciate the easy-to-replace cartridge brake pads, the handy quick-release, and adjustment barrel.

SRAM's Force CX1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike, and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side, hydraulic-brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.

The Rival 1 hydraulic disc brake offers optimized stopping power and modulation for road or cyclocross. Pair with a Rival 11-speed shifter for a 1x set-up, or use as a pair for a singlespeed HRD bike. The brake lever features the HydroR brake platform, with revised ergonomics for better finger wrap. Enjoy seemingly effortless braking regardless of terrain or condition. - Individual Reach Adjust - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Low hand force required - Fully sealed system for no contamination - Easy bleed access

- Works well as a rear brake where the Neo-Retro may cause heel clearance problems - Compatible with drop bar levers and short pull mountain bike levers - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA

The Neo-Retro is a wide-profile cantilever brake with a design based on the geometry of the famous Mafac Tandem brake. Where the Neo-Retro differs from its classic heritage is in its modern materials and adjustability. - Compatible with drop bar levers and short pull mountain bike levers - Modeled after the popular Mafac Tandem cantilever - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA

- Works with all Formula 74mm post mount brake calipers - IS: 51mm (International Standard) tab mount - PM: 74mm post mount

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

- Cold-forged 6061-T6 aluminum arms, available in 85mm or 108mm - Precision sealed bearing pivots, titanium and stainless steel hardware - Flexible cable noodle and streamlined cable fixing point - 35 millimeters of vertical brake pad adjustment

If you believe in better performance then you should believe in hydraulic road (HydroR) brakes. SRAM's award winning HydroR technology is the fulfillment of the promise of better braking, more control, and improved performance in all conditions. SRAM RED is delivering on the promise of braking confidence and security that brings speed control and stability to a new level. - RED ergonomics including Reach Adjust - SRAM Road 11-speed compatible - Optimized power and modulation for higher speeds and more control - Refined lever body design is more comfortable - Easy access bleed port means convenient service - Shift paddle design is lightweight and offers improved finger clearance - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

SRAM's Force 1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between rider and bike and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side rear hydraulic-brake carbon lever has the same shape and feel as the Force 1 right lever, but has no shift paddle. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The brakes themselves provide incredible modulation and stopping power. You'll never go back to rim brakes again! - The moto-style set up allows you to hook up your left brake lever to your rear wheel. - Carbon fiber lever blade - Bleed port is easily accessed

Miscellaneous replacement small parts for Hayes hydraulic disc brake systems. - Includes piston and seal

Replacement levers pivots pin kit for Hayes hydraulic disc levers

Hope X2 2-Piston Disc Brake Pads. • Organic: Softer compound than sintered, works better in dry conditions,but wears faster • Sintered: high-graphite compound; best for wet-weather durability

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

Run as a set for singlespeed machines, or pair with a Force 11-speed shift-brake lever for the ultimate in 1x road. - Complete hydraulic levers (master cylinders) assemblies without calipers. - Carbon brake and aluminum shift lever - Brake lever reach adjustment - Bleed port is easily accessed - Includes 2000m hose and fittings

Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system. - Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss - Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power - MatchMaker compatible for a clean and simplified look - Ambidextrous lever mount design - Lightweight 4-piston dual-diameter caliper - Includes steel-backed organic pads - Front includes 950mm hose - Rear includes 1800mm hose

The Dura 2 Road Holder is a lightweight forged aluminum holder with dual pivot adjustment that houses Kool-Stop's Dual Compound Dura2 Type insert. These holders will fit most Shimano type brake systems. Features: - Aluminum Holder - Water Grooves - Dual Pivot Adjustment - Dual Compound - Ultra lightweight 30g/pair

Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.

The Odyssey Medium Monolever is a favorite with its familiar feel, smooth edges and variety of handle options. - Fits 7/8" bars, has a hinged bracket, and does not include cable knarps

The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. - Uses DOT 5.1 brake fluid - Lever body design offers excellent finger wrap, comfort, and control - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a left-side lever with a rear brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

- High performance compound recommended for all-conditions - Alloy backing plate: 50% lighter than steel backing plate

- Mini-v brake for use with standard short pull (road) brake levers - Direct pull cantilever brake is simpler to install than a traditional cantilever brake and gives a narrow profile - Short curved arms give plenty of clearance for cyclocross tires or wide fenders - Spring tension is independently adjustable for each arm, so the brake can be precisely centered on the wheel and adjusted for return strength - Simple pivoting quick release on one arm makes it easy to open the brake to remove a wheel - Made in USA

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

Put supreme control right at your fingertips with Shimano's Deore Two-Finger V-Brake Levers. Ergonomic lever blades are comfortable and easy to use. The internal bumber offers silent lever return, and the reach can be adjusted to fit your hands.