Seatposts

The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.

The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.

Trek-compatible seat mast cap Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately. Key features: - Ultra-light carbon construction - One bolt head design offers easy fore-aft and infinite angle adjustment - Compatible with all Trek road bikes with round seat masts - 175mm and 135mm lengths - 5mm and 20mm offsets - Aluminum clamp

- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset

A specific eTen hydraulic cartridge with single bolt offset saddle clamp allow the enjoyment of droppers at a low price, available with 100mm of travel. - Black hard anodized stanchion and an air spring, hydraulically locked cartridge - Single-bolt alloy head - Remote sold separately

Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.

Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.

- Carbon fiber mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position for micro tuning which allows for superior comfort and performance (no-offset clamp) - Unsurpassed strength to weight ratio - Specific to I-Beam saddle

Pro performance post A seatpost should do one thing well — hold your seat. Our new carbon fiber Pro seatpost does that and more with a reliable 2-bolt design that lets you swap saddles with ease. Great for road or mountain use and available in a slew of diameters, lengths and offsets, this post gives you the setup versatility you've always wanted. - 2-bolt micro-adjust head mechanism offers 15 degrees of adjustment - OCLV carbon fiber shaft - Forged 6061-T6 alloy head with OCLV carbon fiber top and bottom clamps - Unique clamp shape allows for easy saddle changes - Compatible with standard and oversize carbon saddle rails - Suitable for road or mountain use

Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head

Carbon seatpost with a proven low-profile, 2-bolt clamp that won't bottom out on the saddle. - Low-profile clamp reduces stress on lightweight rails - 2-bolt design securely holds the saddle in place and is easy to adjust - Offset: 25mm - Clamp Style: Standard Rails - Material: Carbon

Comp Carbon Zero Setpost

The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most. - Carbon shaft - Bonded Aluminum two-bolt head

The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder. - UD carbon shaft with bonded alloy head - Forged alloy "SBS" 2-bolt head - Chromoly hardware - 20mm setback - Fits 7mm standard rails and 7x9mm oval rails - 221 grams

The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder. - UD carbon shaft with bonded alloy head - Forged alloy "SBS" 2-bolt head - Chromoly hardware - 20mm setback - Fits 7mm standard rails and 7x9mm oval rails - 221 grams

Our new EA90 seatpost applies our patent pending ISA saddle adjustment allowing for independent seat angle and fore-aft movement, helping you refine your positioning without needing to undo your rail clamps for each minute tweak. Saddle angle is then locked in place so you have the confidence your saddle will stay put after you find your fit. - Finish: Black anodized - Weight: Zero, 295g; Setback, 268g - Head offset: 0mm, 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Material: EA90 alloy

Sleek design and ultimate functionality of the WCS 1-Bolt seatpost are the hallmarks of Ritchey design. Single bolt-actuated side load clamp offers easy adjustability and simple security in a post that works as nicely as it looks. - 3D Forged 7050 Alloy - Available in 27.2, 30.9 and 31.6mm diameters - Available in 350 and 400mm lengths - 20mm Offset - 7x7mm saddle rail clamp included - Interchangeable clamps available for carbon rail saddles - Saddle Clamp Torque Spec: 12Nm - Finish: Blatte - 195g (27.2/350)

Bike fit is important - a bike should feel like an extension of the body, especially when dialed in. Getting just the right saddle position is second-to-none when putting out power over long miles is concerned. Ritchey Link posts offer two clamp positions for greater adjustability in dialing in the right fit. - 7050 Alloy 2pc Press Fit Head - 15mm adjustable setback - Reversible clamp for greater fore/aft adjustability - Finish: BB black

Whether it's a cross remount, an unexpected pothole, or a rough line down the trail, the WCS Zero post will not relinquish its position. Featuring a confidence-inspiring extra-secure fore/aft bolt system, the Zero post is second-to-none in ease of installation and fit adjustment. - Fore/aft adjustment bolts for precision adjustment and secure clamping - 3D Forged 2014 Alloy - Offset: Zero - Cradle: Standard saddle rail clamp

The redesigned Zero post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it. - Material: 2014 alloy - Total length: 400mm (including 100mm of minimum insert) - Saddle clamp: 2-bolt fore/aft - Saddle clamp torque: 7Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 240g (27.2x400mm)

- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)

- Alloy mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position (no-offset clamp) - I-Beam single rail clamp post specific to I-Beam saddles

Ritchey's WCS 1-Bolt Seatmast Topper makes saddle installation and adjustment super easy. It's constructed of forged aluminum for strength and the single bolt clamp makes it very simple to find your perfect saddle position. Furthering the ideal fit, the WCS Seatmast Topper comes in 50mm and 70mm lengths and different offsets.

The Salsa Guide Deluxe Seatpost is premium aluminum: lightweight, strong, and drama-free. Count on it to be there when you need it. - 2014 Aluminum shaft - Two-bolt head

The EA70 Zero is Easton’s top-end aluminum seatpost, with a sleek, low-profile clamp design, impressive stability and great clearance. This post features EA70 TaperWall aluminum tubing coupled with a durable two-bolt integrated head.

The proven 2-bolt design on this classic provides a class-leading balance between strength, weight, and adjustability. The two-bolt design is easy to adjust and holds tight. Its low profile clamp reduces stress on lightweight rails and won't bottom out, and the bolts are oriented to the axis of the rails for the greatest contact area with the saddle. The Classic also features Ritchey's 'Classic' high-polish silver finish. - Material: 2014 alloy - Total length: 350mm (including 100mm of minimum insert) - Saddle clamp: standard - Saddle clamp torque: 13Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 260g (27.2x350mm) - Color: high-polish silver

Now available with the iconic high-polish silver finish, the Ritchey Classic Zero seatpost features the same Zero post head and zero setback as the original Zero post. Inspired by life, built to last, and providing a classy aesthetic, the Classic Zero offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're cruising along rough gravel roads, remounting after running a section of slop on the 'cross course, ripping some sublime singletrack, or out on an epic road ride, the Classic Zero seatpost keeps your saddle exactly where you want it. - Material: 6061 alloy - Offset: zero - Saddle clamp: 2-bolt fore/aft - Saddle clamp torque: 7Nm (max) - Seat collar torque: not specified for seatpost—follow frame/seat binder specification - Weight: 290g (27.2 x 400mm)

The Elite seatpost is a distilled design guaranteed to deliver reliable everyday performance for years to come. Perfect as a replacement or your next upgrade. With an alloy body and a 2-bolt micro adjust head, this seatpost is available in a slew of diameters, lengths, and offsets to get you the right position. Key features: - 2-bolt micro-adjust head mechanism offers 15 degrees of adjustment - Constructed of 2014 alloy - Forged 6061-T6 alloy head, top and bottom clamps - Unique clamp shape allows for easy saddle changes - Compatible with standard and oversize carbon saddle rails - Suitable for road or mountain use

The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings. 0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment. 30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts. - Material: 6061 aluminum - 2-bolt adjustability - Minimum insertion length: 90mm

Proven 2-bolt design provides a class-leading balance between strength, weight, and easy adjustability. Low-profile clamp reduces stress on lightweight rails and won't bottom out. - Material: 6061 alloy - Saddle clamp: standard - Saddle clamp torque: 13Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification

- Length: 400mm - Offset: 0mm - Clamp Style: Standard Rails - Material: Aluminum

- Length: 400mm - Offset: 0mm - Clamp Style: Standard Rails - Material: Aluminum

WCS 1-Bolt mast topper for round ISP, compatible with 1-Bolt alloy clamp kits. - Material: 2014 alloy - Saddle clamp: sold separately - Seat collar torque: 5Nm (max) - Color: high-polish black

The Salsa Guide Seatpost is designed to blend into the background; just like a good seatpost should. Strong, reliable, and always just where you left it. - 6061 Aluminum shaft - Two-bolt head

Easton's EA50 Seatpost is rugged, reliable and perfect for all your cycling adventures. It's made from 2014-aluminum with Easton's TaperWall technology that controls the post's internal thickness, adding material where you need it and none where you don't. It provides excellent strength and durability while keeping the weight low. Plus, the EA50 boasts an easy-to-use 2-bolt clamp for secure seat adjustments.

Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.

The Chester seatpost from Race Face is a durable, no-nonsense post that can take on rock gardens and plenty of rough landings while still leaving bills in your pocket for aprés ride festivities. Features • Seat tube drawn from 6061 Alloy • Proven dual bolt, multi-adjustable head design. • Shot peened for high impact strength & fatigue resistance.

The Tuner pivotal post features a 220mm length with grooves evenly spaced every 15mm for cut lines or seat height indication. - 6061 alloy forged post - Weight: 4.6oz - Clamp Style: Pivotal

It’s a traditional straight up pivotal design with a 200mm length.

Sunday Bikes pivotal seatpost.

Dimension Suspension Seatpost - Clamp Style: Std Rails - Diameter: 27.2mm - Length: 350mm - Material: Aluminum - Max Height: 255mm - Min Height: 130mm - Offset (mm): 0mm - Seatpost Type: Suspension - Travel (mm): 35mm - Weight: 450g

- RaceFace Ride XC Seatposts made of forged AL-6061 - Forged, anodized and shot peened AL-6061 mast - 2-bolt head holds saddle securely while retaining easy adjustability - Weight: 295 g

Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g

- Strong and simple precision-forged aluminum seatpost - One-bolt clamp design allows for a wide range of saddle angles with infinite intermediate adjustability

Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset

- A strong, lightweight alloy post, licensed from Pivotal BMX Inc. - Allows seat to be dropped lower than conventional posts - 3D forged 7075 alloy post with internal oval construction for strength - 10mm bolt tightening system, accessed through a slot in Pivotal Seat top (seat sold separately) - 100g (24.5mm) / 258g (27.2mm)

• Forged aluminum • Integrated micro-adjust seat clamp

- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams

Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.

Stolen Thermalite Pivotal Seatpost. Thermalite is proprietary material made with Nylon 66 base w/ 50% longer glass fiber infusion. Thermalite posts are 30% lighter than the current Alloy posts on the market. - Dupont Nylon 66 with 50% longer glass fiber infusion - 1/3 lighter than any alloy post on the market - Compatible with all Pivotal seats - Weight: 2.8oz.

Genuine replacement parts. Replacement seat posts for a variety of frame styles. Original equipment replacement seat posts. Durable aluminum construction

- LEV has always represented the latest technology but is already a classic among top contending dropper posts. - With myriad of firsts to its name; first hydraulic dropper to offer zero cable movement, first dropper to win a UCI World XC Eliminator event and first in countless enduros, magazine tests and customer satisfaction polls, LEV IS the first dropper seatpost to outperform itself.

- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.